LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 364 (Engine Controls And Fuel - 5.3L, 6.0L & 6.2L - DTC P0443 Through DTC P3449 And Troubleshooting) >> Diagnostic Information and Procedures >> DTC P2120, P2122, P2123, P2125, P2127, P2128, or P2138 >> Typical Scan Tool Data

Typical Scan Tool Data

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
APP Sensor 1 and 2

Circuit Short to Ground Open Short to Voltage
Operating Conditions:  The engine is operating at idle.
Parameter Normal Range:  APP Sensor 1 0.88-1.08 V
Parameter Normal Range:  APP Sensor 2 0.39-0.59 V
APP Sensor 1 5 V Reference 0.00 V 0.00 V 2.7-3.7 V
APP Sensor 2 5 V Reference 0.00 V 0.00 V 1-2 V
APP Sensor 1 Signal 0.00 V 0.00 V 4-5 V
APP Sensor 2 Signal 0.00 V 0.00 V 4-5 V
APP Sensor 1 Low Reference - 4-5 V -
APP Sensor 2 Low Reference - 4-5 V -