Conditions for Running the DTC
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
P2762
- DTC P2762 has not set this ignition cycle.
- The engine speed is 400 RPM or greater for 5 seconds.
- The ignition voltage is 8.6 volts or greater.
P2763
- DTCs P2763, P0658, or P0659 have not set this ignition cycle.
- The engine speed is 400 RPM or greater for 5 seconds.
- The ignition voltage is 8.6 volts or greater.
- The high side driver is enabled.
P2764
- DTC P2764, P0658, or P0659 has not set this ignition cycle.
- The engine speed is 400 RPM or greater for 5 seconds.
- The ignition voltage is 8.6 volts or greater.
- The high side driver is enabled.