Circuit/System Description
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
The driver shift request (DSR), also known as the TAP Up/Downshift manual shift function, allows the driver to select the desired range of gears for current driving conditions. The DSR shift system is activated when the gear selector is in the manual position. The DSR system is deactivated in all other range positions. When DSR is selected, a signal is sent to the body control module (BCM) and the also to the transmission control module (TCM). Each time a signal is sent, an internal counter in the BCM and TCM increments. Both counters must have the same value. This code sets when the rolling count value of the TCM does not match the same rolling count value sent from the BCM.