Conditions for Setting the DTC
WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
P2714 - Condition 1
The clutch pressure control solenoid 4 commanded pressure is 1800 kPa (261 psi) and the TFP switch 4 state parameter is Low for 30 seconds.
P2714 - Condition 2
The clutch pressure control solenoid 4 commanded pressure is 1800 kPa (261 psi) and the TFP switch 4 state parameter is Low for 0.5 seconds greater than 5 times during a key cycle.
P2715 - Condition 1
The clutch pressure control solenoid 4 commanded pressure is 5 kPa (1 psi) and the TFP switch 4 state parameter is High for 30 seconds.
P2715 - Condition 2
The clutch pressure control solenoid 4 commanded pressure is 5 kPa (1 psi) and the TFP switch 4 state parameter is High for 0.02 seconds greater than 5 times during a key cycle.