LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 361 (Automatic Transmission - 2ML70 - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC P0796 or P0797 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.

The clutch pressure control solenoid 3 is part of the control solenoid valve assembly and is not serviced separately. The transmission control module (TCM) supplies 12 V to the clutch pressure control solenoid 3 on the high side driver 1 circuit. The TCM controls the clutch pressure control solenoid 3 through the clutch pressure control solenoid 3 control circuit. The normally high clutch pressure control solenoid 3 controls fluid to hybrid low, 1-2 valve and the hybrid low, 1-2 clutch boost valve when commanded ON and exhausts fluid when commanded OFF.