LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 360 (Automatic Transmission - 6L80/6L90 - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: EOC Pipe And Pipe Fitting
    GM1195424Courtesy of GENERAL MOTORS CORP.
    NOTE:

    Discard the TOC retaining clip and install a new retaining clip.

  1. Install the TOC pipe into the TOC pipe fitting.

    A distinct snap should be heard or felt when assembling the TOC pipe to the fitting.

  2. To ensure the cooler line is properly installed, give the cooler pipe a gentle pull.