LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 360 (Automatic Transmission - 6L80/6L90 - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Park Pawl Actuator Guide and Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Park Pawl Actuator Guide And Guide Pin
GM2699067Courtesy of GENERAL MOTORS CORP.
  1. Install New seals (3) on the park pawl actuator (2).
  2. Install the park pawl actuator (2).
  3. Install the park pawl actuator guide pin (1).
  4. Install the transmission fluid pan. Refer to Automatic Transmission Fluid, Fluid Pan and/or Filter Replacement .
  5. Install the case extension and gasket. Refer to Case Extension and Gasket Replacement .
scientia non olet · About LEMON Manuals