Disarming the System: Notes
WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
In the arm initiated mode, the following conditions are true:
- The security telltale is ON.
- The doors are open.
In order to disarm a system in the arm initiated mode, perform one of the following procedures:
- Press the power door lock switch to the UNLOCK position.
- Press the door unlock button on the key fob.
In order to disarm a system in the arm delay or the armed mode, perform one of the following procedures:
- Use the key in order to unlock one of the doors.
- Press the door unlock button on the key fob.