LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Theft Deterrent) >> Description and Operation >> Content Theft Deterrent (CTD) Description and Operation >> Content Theft Deterrent (CTD) System >> Remote Panic Alarm/Vehicle Locator State

Remote Panic Alarm/Vehicle Locator State

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

The CTD system will enter the remote panic alarm/vehicle locator state when the panic button on the key fob is pressed. When the panic button is pressed, the remote control door lock receiver sends a message to the BCM. The BCM will sound the horns and flash the headlamps and the parklamps. You can disable the remote panic alarm/vehicle locator state by pressing the panic button on the key fob again or the system will time out after 30 seconds.

scientia non olet · About LEMON Manuals