Transfer Case Two/Four Wheel Drive Actuator Position Sensor Replacement

WARNING: This page is about a different car, the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Transfer Case Two/Four Wheel Drive Actuator Position Sensor

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
1	Two/Four Wheel Drive Actuator Position Sensor Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Two/Four Wheel Drive Actuator Position Sensor
3	Two/Four Wheel Drive Actuator Position Sensor O-ring Seal Procedure Lightly lubricate the O-ring with clean DEXRON® VI.