Transfer Case Holding Fixture Installation

WARNING: This page is about a different car, the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Transfer Case Holding Fixture

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Transfer Case Nuts Special Tools J 45759 Assembly Fixture For equivalent regional tools, refer to Special Tools .
2	Transfer Case Special Tools J 3289-20 Holding Fixture
3	Pivot Pin Always secure with the pivot pin after rotating. The transfer case can be rotated 360 degrees to facilitate repair.