Fuel Tank Filler Pipe Replacement: Assemble

WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Fuel Hose Components

Courtesy of GENERAL MOTORS CORP.

CAUTION:

Refer to Fastener Caution .

Evaporative emission hose clamp (10)
Tighten

Tighten the clamp to 2.5 N.m (22 lb in).
Evaporative emission hose (9)
Fuel tank fill hose clamp (8)
Tighten

Tighten the clamp to 2.5 N.m (22 lb in).
Fuel tank fill hose (7)
Fuel tank fill hose clamp (6)
Tighten

Tighten the clamp to 2.5 N.m (22 lb in).
Fuel tank fill pipe clip (5)
Fuel tank fill hose (4)
Fuel tank fill pipe housing (3)
Fuel tank fill pipe housing bolts (2)
Tighten

Tighten the bolts to 2.3 N.m (20 lb in).
Fuel tank filler vent hose (1)