LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 354 (Suspension Control System - Suspension Damping) >> Diagnostic Information and Procedures >> DTC C0575, C0580, C0585, or C0590 >> Component Testing

Component Testing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the appropriate suspension damper.
  2. Test for.7-3.3 Ω between the control terminal A and the low control terminal B of the suspension damper.
    • If not within the specified range, replace the suspension damper.