LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 353 (Hybrid/EV Energy Storage System) >> Diagnostic Information and Procedures >> DTC P0A1F, P1A01, P1A05, or P1A06 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.

The drive motor generator battery control module will diagnose its own systems and determine when a fault condition is present. Diagnostics and system status is communicated from the drive motor generator battery control module to the drive motor generator control module through serial data. The drive motor generator control module is the host controller for diagnostic trouble code (DTC) information.

This diagnostic applies to internal microprocessor integrity conditions within the drive motor generator battery control module. This is an internal electronic fault detection diagnostic of the drive motor generator battery control module. This fault is internal to the drive motor generator battery control module and no external circuits are involved.