Installation Procedure

WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Auxiliary Fluid Pump Control Module

Courtesy of GENERAL MOTORS CORP.

Install the auxiliary fluid pump control module (2) to the engine control module bracket.
Install the auxiliary fluid pump control module electrical connector (1) to the auxiliary fuse block.

Fig 2: Auxiliary Fluid Pump Control Module Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the auxiliary fluid pump control module electrical connector (1) to the engine wiring harness electrical connector (2).

Fig 3: Auxiliary Fluid Pump Electrical Wire Harness Connector

Courtesy of GENERAL MOTORS CORP.

Connect the auxiliary fluid pump electrical wire harness connector (1) to the auxiliary fluid pump control module connector (2).