Removal Procedure

WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.

Raise the vehicle. Refer to Lifting and Jacking the Vehicle .

Fig 1: Range Selector Lever Cable Heat Shield

Courtesy of GENERAL MOTORS CORP.

Remove the range selector lever cable heat shield bolts (1).
Remove the range selector lever cable heat shield (2).

Fig 2: Range Selector Lever Cable And Retainer

Courtesy of GENERAL MOTORS CORP.

Disconnect the range selector lever cable (2) from the range select lever.
Remove the range selector lever cable retainer (1).
Remove the range selector lever cable (2) from the cable bracket.

Fig 3: Range Selector Lever

Courtesy of GENERAL MOTORS CORP.

WARNING:

Hold the transmission range selector lever while removing or installing the lever retaining nut. Failure to hold the lever can cause damage to the transmission internal park system components which could allow the vehicle to roll when placed in the park position.

Remove the range selector lever nut (1).
Remove the range selector lever (2).