Conditions for Setting the DTC
WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
Condition 1
Position sensor offset value not learned because drive motor speed is greater than 50 RPM.
Condition 2
Position sensor offset value not learned because hybrid battery voltage is less than 192 V.
Condition 3
Position sensor offset value not learned because drive motor phase to phase current difference is less than 15 A.
Condition 4
Position sensor offset value not learned because offset learn value is greater than 25 degrees.