LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 347 (Hybrid/EV Control System) >> Diagnostic Information and Procedures >> DTC P0C11-P0C16 >> Conditions for Running the DTC

Conditions for Running the DTC

WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.

P0C11-P0C16 

The Hybrid Wake up circuit is active.

P0C11 

P0AEE, P0AEF, and P0AF0 are not set.

P0C12 

P0BD2, P0BD3, and P0BD4 are not set.

P0C13 

P0BDC, P0BDD and P0BDE are not set.

P0C14 

P0AF3, P0AF4, and P0AF5 are not set.

P0C15 

P0BD7, P0BD8, and P0BD9 are not set.

P0C16 

P0BE1, P0BE2, and P0BE3 are not set.