LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 347 (Hybrid/EV Control System) >> Diagnostic Information and Procedures >> DTC P0A45, P0A46, P0C57, P0C58, P0C61, P0C62, or P1B04 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.

P0C57 or P0C61 

Circuit voltage less than 0.5 V.

P0C58 or P0C62 

Circuit voltage greater than 3.0 V.

P0A45 

The motor control module cannot determine the motor position based upon the sensor signals.

P0A46 

The motor control module detects a degraded motor position sensor signal.

P1B04 

The motor control module cannot track the motor position based upon the sensor signals.