Stub Shaft Housing Replacement
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Stub Shaft Housing Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedures Remove the power steering gear. Refer to Steering Gear Replacement (Recirculating Ball Without LMM) , Steering Gear Replacement (Two Mode Hybrid) , Steering Gear Replacement (Hydraulic Rack and Pinion) . |
|
| 1 | Stub Shaft Housing Bolt (Qty: 4)
CAUTION:
Refer to Fastener Caution . Tighten 62 N.m (46 lb ft) |
| 2 | Stub Shaft Housing |
| 3 | Stub Shaft Housing O-Ring (Qty: 2) TIP: Grease the stub shaft housing O-Rings with the special grease supplied in the service kit. |