LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 342 (Power Steering System) >> Repair Instructions >> Power Steering Gear Outlet Pipe/Hose Replacement (Gas With Hydroboost) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place drain pans under the vehicle as needed.
  2. Fig 1: Power Steering Gear Outlet Pipe/Hose & Components (With Hydroboost)
    GM1751501Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the power steering fluid cooler hose clamp and hose (3) from the steering gear (2).
  4. Remove the power steering gear outlet pipe (1) from the steering gear (2).