Transfer Case Adapter Replacement

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Transfer Case Adapter

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the transfer case. Refer to Transfer Case Assembly Replacement . Remove the transmission mount. Refer to Transmission Mount Replacement (2WD) , Transmission Mount Replacement (4WD) for the 6L45/6L50/6L80/6L90.
1	Transfer Case
2	Gasket
3	Transfer Case Adapter Bolt (Qty: 6) CAUTION: Refer to Fastener Caution . Tighten 50 N.m (37 lb ft)
4	Extension Housing
5	Seal NOTE: Seal is only used for the 4L60-E transmission and should be replaced when the adapter is removed. Do Not use any type of sealant or adhesive in place of or with the seal.