LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 337 (Disc Brake System) >> Repair Instructions >> Front Brake Caliper Bracket Replacement (2500 Series) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  3. Remove the brake pads. Refer to Front Disc Brake Pads Replacement (2500 Series) , Front Disc Brake Pads Replacement (1500 Series) .
  4. Remove the brake pad retaining springs.
    5. Fig 1: Brake Caliper Bracket Mounting And Bolts
    GM794150Courtesy of GENERAL MOTORS CORP.
  5. Remove the brake caliper bracket mounting bolts (2).
  6. Remove the brake caliper bracket (1).
scientia non olet · About LEMON Manuals