LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 332 (Antilock Brake System - Hybrid (Hp2)) >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Antilock Brake System (ABS) Module Splash Shield Bolt 20 N.m 15 lb ft
Brake Pressure Modulator Valve (BPMV) Bolt 9 N.m 80 lb in
Brake Modulator Manual Pressure Relief Valve 40 N.m 30 lb ft
Brake Pipe Fitting 18 N.m 13 lb ft
Brake Pipe Manifold Bolt 11 N.m 97 lb in
BPMV Bracket Bolt 22 N.m 16 lb ft
Electronic Brake Control Module (EBCM) Bolt 3 N.m 27 lb in
Master Cylinder Hose Fitting- Return and Supply 8 N.m 71 lb in
Wheel Speed Sensor Bolt- Front 13 N.m 115 lb in
Wheel Speed Sensor Bolt- Rear 13 N.m 115 lb in
Yaw Rate Sensor/Lateral Accelerometer Nut 7 N.m 62 lb in