LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 331 (Engine Electrical - Hybrid) >> Repair Instructions >> Generator Control Module Ground Strap Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Drive Motor Generator Control Module Ground Strap And Bolt
    GM1968778Courtesy of GENERAL MOTORS CORP.
  1. Remove the air cleaner assembly. Refer to Upper Intake Manifold Cover Replacement .
  2. Remove the drive motor generator control module ground strap bolt (1) and strap (2).
scientia non olet · About LEMON Manuals