LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 331 (Engine Electrical - Hybrid) >> Repair Instructions >> Engine Ground Strap Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Engine Wiring Harness Ground Bolt At Engine Block
    GM663475Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine wiring harness ground bolt.
  2. Reposition the engine wiring harness ground and ground strap.
    3. Fig 2: Ground Strap Nut
    GM663474Courtesy of GENERAL MOTORS CORP.
  3. Remove the ground strap nut from the stud at the front of dash.
  4. Remove the ground strap from the stud.
scientia non olet · About LEMON Manuals