LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 331 (Engine Electrical - Hybrid) >> Repair Instructions >> Battery Negative Cable Disconnection and Connection >> Connect Procedure

Connect Procedure

WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Clean any existing corrosion from the battery terminal and the battery cable.

    Fig 1: Battery And Associated Components
    GM1968005Courtesy of GENERAL MOTORS CORP.
  1. Install the negative battery cable (6) to the battery.
  2. Rotate the lever lock (4) clockwise until an audible click is heard in order to connect the negative battery cable to the battery.
  3. Position the negative battery cable insulating cover (5) over the negative terminal.
scientia non olet · About LEMON Manuals