LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 331 (Engine Electrical - Hybrid) >> Diagnostic Information and Procedures >> DTC B1516 >> Typical Scan Tool Data

Typical Scan Tool Data

WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
Battery Current - BCM

Circuit Short to Ground Open Short to Voltage
Operating Conditions:  Ignition ON, engine OFF. Headlamps and all accessories Off.
Parameter Normal Range:  -5 amps to -25 amps
BCM B+ -59.9 amps -59.9 amps -
5-Volt Reference -59.9 amps -59.9 amps -
Signal -59.9 amps 59.9 amps 59.9 amps
Low Reference - 59.9 amps -
Battery Voltage - BCM

Circuit Short to Ground Open Short to Voltage
Operating Conditions:  Ignition ON, engine OFF.
Parameter Normal Value:  12.60 Volts
BCM B+ 25.60 Volts 26.10 Volts -