LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 329 (Power Seat System) >> Diagnostic Information and Procedures >> Power Seat Inoperative (With Memory A45) >> Circuit/System Verification

Circuit/System Verification

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, observe the scan tool Driver Position Module seat switch parameters while pressing the appropriate seat switch. The reading should change between Inactive and Active.
    • If the reading does not change between the specified values, refer to the Seat Adjuster Switch Circuit Test below.
  2. If all seat switch inputs to the MSM function normal, refer to the appropriate test listed below:
    • Seat Motor Control Circuit Test
    • Recline Motor Control Circuit Test
scientia non olet · About LEMON Manuals