LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 329 (Power Seat System) >> Diagnostic Information and Procedures >> DTC B1335 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

B1335 00 

Current out of the module does not match the current returning to the module within 5 amps.

B1335 0B 

The absolute current or an over-current has exceeded the maximum value allowed.

B1335 42 

This DTC will set if the module calibration is not programmed.

B1335 4B 

This DTC will set if the module calibration is out of range.

scientia non olet · About LEMON Manuals