LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 329 (Power Seat System) >> Description and Operation >> Memory Seats Description and Operation >> Power Seat and Lumbar Switches

Power Seat and Lumbar Switches

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Battery positive voltage is supplied at all times to the seat adjuster switch and the lumbar switch from the MSM and a 10 A fuse located in the I/P fuse block. When the seat or lumbar switches are pressed they send a 12 V signal to the MSM. The MSM then commands the selected seat motor to move in response to the switch input.

scientia non olet · About LEMON Manuals