Driver or Passenger Seat Back Ventilation Heating and Cooling Blower Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Driver Or Passenger Seat Back Ventilation Heating & Cooling Blower (Denali With KB6)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Front Seat Back Cushion Finish Panel Procedure Using a nylon flat-bladed tool push the tabs in on the side of the panel to release from the seat back to remove.
2	Front Seat Back Blower Push in Retainer
3	Front Seat Back Blower Rivet (Qty: 2) Procedure Drill out the old rivets and install new rivets when replacing the blower assembly.
4	Front Seat Back Blower Assembly Procedure Disconnect the electrical connector.