LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 326 (Seat Heating System And Seat Cooling System) >> Diagnostic Information and Procedures >> DTC B2345 (w/o HP2 with Memory) >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

B2345 00 

After a heated seat is activated, the MSM detects a shorted circuit on the seat heating element supply voltage circuit or control circuit.

B2345 13 

Any of the temperature sensor inputs remains below 1.5 V for a seat back or 0.95 V for a seat cushion more than 1 second.

B2345 42 

This DTC will set if the module calibration is not programmed.

B2345 4B 

This DTC will set if the module calibration is out of range.

scientia non olet · About LEMON Manuals