Circuit/System Description
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Voltage to the adjustable pedal switch is supplied through the park enable relay while in a de-energized state. The park enable relay is controlled by the body control module (BCM) through a high side drive control circuit and will be energized whenever the ignition is in the accessory, run, or crank positions and the transmission is in reverse or the cruise control is engaged. The adjustable pedals switch controls the adjustable pedals relay by applying battery voltage to one of the coils. In an inactive state both of the relay switch contacts are closed to ground and when one of the relay coils is energized its switch contact is closed to battery voltage.