Installation Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Lubricate the seal on the fuel pressure sensor.
- Press the fuel pressure sensor into the line.
- Install the intermediate fuel and EVAP lines. Refer to Fuel Hose/Pipe Assembly Replacement (1500 SWB - 98.4L (26 gal) Tank + E85) , Fuel Hose/Pipe Assembly Replacement (1500 LWB - 117.3L (31 gal) Tank) , Fuel Hose/Pipe Assembly Replacement (1500 LWB - 117.3L (31 gal) Tank + E85) , Fuel Hose/Pipe Assembly Replacement (1500 SWB - 98.4L (26 gal) Tank) .