Assemble Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Evaporative emission hose clamp (10)
Tighten
Tighten the clamp to 2.5 N.m (22 lb in).
- Evaporative emission hose (9)
- Fuel tank fill hose clamp (8)
Tighten
Tighten the clamp to 2.5 N.m (22 lb in).
- Fuel tank fill hose (7)
- Fuel tank fill hose clamp (6)
Tighten
Tighten the clamp to 2.5 N.m (22 lb in).
- Fuel tank fill pipe clip (5)
- Fuel tank fill hose (4)
- Fuel tank fill pipe housing (3)
- Fuel tank fill pipe housing bolts (2)
Tighten
Tighten the bolts to 2.3 N.m (20 lb in).
- Fuel tank filler vent hose (1)
CAUTION:
Refer to Fastener Caution .