LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 322 (Engine Controls And Fuel - 5.3L, 6.0L & 6.2L - Repair Instructions) >> Repair Instructions >> Camshaft Position Sensor Replacement (Without Actuator)

Camshaft Position Sensor Replacement (Without Actuator)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Camshaft Position Sensor (Without Actuator)
GM2491402Courtesy of GENERAL MOTORS CORP.
Camshaft Position Sensor Replacement (Without Actuator)

Callout Component Name
1 Camshaft Position Sensor Fastener (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Tighten 
12 N.m (106 lb in)
2 Camshaft Position Sensor
Procedure 
Disconnect the electrical connectors.