Camshaft Position Sensor Replacement (With Actuator)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Camshaft Position Sensor Replacement (With Actuator)
| Callout | Component Name |
|---|---|
| Preliminary Procedures Remove the water pump. Refer to Water Pump Replacement |
|
| 1 | Camshaft Position Sensor Fastener (Qty: 3)
CAUTION:
Refer to Fastener Caution . Tighten 12 N.m (106 lb in) |
| 2 | Camshaft Position Sensor Procedure Disconnect the electrical connectors. |