LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 321 (Frame And Underbody) >> Repair Instructions >> Trailer Hitch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the hitch platform to the vehicle.
    2. Fig 1: Hitch Platform And Platform Bolts
    GM1702263Courtesy of GENERAL MOTORS CORP.
    CAUTION:

    Refer to Fastener Caution .

  2. Install the platform hitch bolts to the frame rails and the rear bumper.
    • Tighten the trailer hitch-to-frame bolts to 113 N.m (83 lb ft).
    • Tighten the trailer hitch-to-bumper bolts to 100 N.m (74 lb ft).
    3. Fig 2: Trailer Wiring Harness
    GM399253Courtesy of GENERAL MOTORS CORP.
  3. Connect the trailer wiring harness.
scientia non olet · About LEMON Manuals