LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 321 (Frame And Underbody) >> Repair Instructions >> Oil Pan Skid Plate Replacement (2500/3500 with RPO NZZ) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Oil Pan Skid Plate And Bolts
    GM1698082Courtesy of GENERAL MOTORS CORP.
  1. Position the oil skid plate on the frame.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the oil skid plate mounting bolts and tighten to 28 N.m (21 lb ft).
scientia non olet · About LEMON Manuals