Assist Step Replacement (Chevrolet HP2)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Assist Step And Bolts (Chevrolet HP2)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
1	Assist Step Extension
2	Assist Step Extension Bolt CAUTION: Refer to Fastener Caution . Tighten 18 N.m (13 lb ft)
3	Assist Step Assembly
4	Assist Step Assembly Bracket Bolt (Qty: 8) Tighten 18 N.m (13 lb ft) TIP: Secure the forward and rearward bolts first after the assist step has been installed.
5	Assist Step Bracket Body Bolt (Qty: 4) Tighten 18 N.m (13 lb ft)