LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 320 (Wiring Systems And Power Management - Repair Instructions) >> Repair Instructions >> Body Wiring Harness Junction Block Replacement

Body Wiring Harness Junction Block Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Body Wiring Harness Junction Block
GM1823559Courtesy of GENERAL MOTORS CORP.
Body Wiring Harness Junction Block Replacement

Callout Component Name
1 Body Harness Junction Block

Procedure

  1. Remove the cover.
  2. Disconnect the electrical connectors.
scientia non olet · About LEMON Manuals