LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 319 (Engine Cooling System) >> Repair Instructions >> Radiator Surge Tank Replacement (Non-HP2)

Radiator Surge Tank Replacement (Non-HP2)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Radiator Surge Tank (Non-HP2)
GM2042841Courtesy of GENERAL MOTORS CORP.
Radiator Surge Tank Replacement (Non-HP2)

Callout Component Name

Preliminary Procedure

  1. Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) .
  2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
1 Surge Tank Bolt
CAUTION:

Refer to Fastener Caution .


Tighten 
10 N.m (89 lb in)
2 Surge Tank Nut
Tighten 
10 N.m (89 lb in)
3 Surge Tank
TIP:  Remove the surge tank hoses from the surge tank.