LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 319 (Engine Cooling System) >> Repair Instructions >> Radiator Surge Tank Inlet Hose/Pipe Replacement (HP2)

Radiator Surge Tank Inlet Hose/Pipe Replacement (HP2)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Radiator Surge Tank Inlet Hose/Pipe (HP2)
GM1967002Courtesy of GENERAL MOTORS CORP.
Radiator Surge Tank Inlet Hose/Pipe Replacement (HP2)

Callout Component Name
Preliminary Procedures 
Partially drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) .
1 Radiator Surge Tank Inlet Hose/Pipe
TIP:  Using J 38185 reposition the radiator surge tank inlet hose/pipe clamps.
Special Tools 
J 38185 Surge Tank Inlet Hose/Pipe