LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 319 (Engine Cooling System) >> Repair Instructions >> Radiator Inlet Hose Replacement (Non-HP2)

Radiator Inlet Hose Replacement (Non-HP2)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Radiator Inlet Hose (Non-HP2)
GM1684158Courtesy of GENERAL MOTORS CORP.
Radiator Inlet Hose Replacement (Non-HP2)

Callout Component Name

Preliminary Procedure

  1. Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) .
  2. Remove the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
1 Radiator Inlet Hose
  • Remove the radiator vent hose from the radiator inlet hose clips.
  • Using J 38185 reposition the radiator inlet hose clamps.