LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 319 (Engine Cooling System) >> Repair Instructions >> Fan Replacement (Mechanical) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Special Tools And Fan Assembly
    GM2087072Courtesy of GENERAL MOTORS CORP.
  1. Remove the upper fan shroud. Refer to Engine Coolant Fan Upper Shroud Replacement (Mechanical) .
  2. Install the J-48460  Fan Clutch Remover and Installer Kit (1).
  3. Install the J 41240-5A  Fan Clutch Wrench (2).
    4. Fig 2: Fan Assembly
    GM367004Courtesy of GENERAL MOTORS CORP.
  4. Remove the fan hub nut from the water pump in a counterclockwise rotation.
    5. Fig 3: Fan Clutch And Fan Blade
    GM367006Courtesy of GENERAL MOTORS CORP.
  5. Remove the fan clutch bolts from the rear of the fan blade.
  6. Separate the fan clutch from the fan blade.
scientia non olet · About LEMON Manuals