LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 319 (Engine Cooling System) >> Repair Instructions >> Engine Coolant Fan Replacement (Non-HP2) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Cooling Fan Blades
    GM1505516Courtesy of GENERAL MOTORS CORP.
  1. Remove the cooling fan and shroud. Refer to Cooling Fan and Shroud Replacement (Non-HP2) , Cooling Fan and Shroud Replacement (HP2) .
  2. Remove the cooling fan blade retainers.
  3. Remove the cooling fan blades.
scientia non olet · About LEMON Manuals