LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 319 (Engine Cooling System) >> Diagnostic Information and Procedures >> Coolant Heater Inoperative >> Circuit/System Description

Circuit/System Description

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

The optional coolant heater is a heating element that mounts in the engine block in place of an existing anti-freeze plug. The coolant heater operates using an external 110 volt AC power source and is designed to warm the coolant in the engine block for improved starting in very cold weather. The coolant heater also helps reduce fuel consumption when a cold engine is warming up. The detachable AC power cord contains an internal thermal switch that opens, to prevent operation when the ambient temperature is warmer than -10°C (14°F), and closes at -18°C (0°F) to allow operation. The power cord is also equipped with a weather shield to protect the plug when not in use.