LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 318 (Power Door Lock System And Release Systems) >> Repair Instructions >> Door Lock Cylinder Replacement

Door Lock Cylinder Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Door Lock Cylinder
GM1673307Courtesy of GENERAL MOTORS CORP.
Door Lock Cylinder Replacement

Callout Component Name

Preliminary Procedures

  1. Position the door window as needed for service.
  2. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement .
  3. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement .
  4. Remove the outside door handle. Refer to Front Side Door Outside Handle Replacement .
1 Front Side Door Lock Rod
2 Front Side Door Lock Cylinder Pawl Retainer Clip
TIP:  Remove the clip that attaches the cylinder to the door handle.
3 Front Side Door Lock Cylinder Pawl
4 Front Side Door Lock Cylinder
scientia non olet · About LEMON Manuals