LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 318 (Power Door Lock System And Release Systems) >> Diagnostic Information and Procedures >> Power Liftgate Malfunction (Liftgate Latch Switches Malfunction) >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

B153A 00 

The liftgate control module detects a fault in any of the following switch signal circuits:

B153A 08 

When the liftgate control module detects a loss of B+ voltage, an open/high resistance in the sensor signal circuit, an open/high resistance in the liftgate latch low reference circuit, or any incorrect combination of signals from the following switch inputs: